Traceable miniature motion components for medical-device development and lab automation.
Medical and surgical robotics usually need low backlash, smooth short-stroke motion, traceable material, and careful lubricant or cleanliness planning. The screw should be evaluated as part of the device risk file, not only as a mechanical component.
Clarify whether the screw is used in surgical tooling, pumping, imaging positioning, rehabilitation, or non-patient-contact automation.
Risk if missed: The required evidence package changes by risk class and can delay validation if missed in early samples.
Define lubricant, cleaning, particle, packaging, and material restrictions before prototype release.
Risk if missed: A sample that works mechanically may need a rebuild if the lubricant or packaging is not acceptable for validation.
Provide speed, duty cycle, expected dwell time, backlash target, and allowable temperature rise.
Risk if missed: Low-speed stick-slip or heat rise can be more important than maximum load rating in medical motion systems.
| Evaluation Metric | Typical Range | Buyer Relevance |
|---|---|---|
| Reliability | First-article, AQL, or expanded inspection by scope | Inspection level should match the device risk class and validation phase. |
| Capability | Evidence | Buyer Value |
|---|---|---|
| Traceable small-part manufacturing | Material lot, heat-treatment record, dimensional inspection, and surface finish record for each sample batch. | Supports design history and supplier quality records during device development. |
| Low-backlash micro assembly control | Backlash or axial play measurement, preload torque report, and lead accuracy chart. | Gives engineering a repeatable basis for surgical or pump motion validation. |
| Cleanliness planning | Lubricant, packaging, and handling notes included in the RFQ response and sample plan. | Reduces rework when the project moves from bench prototype to controlled validation. |
Step 1
Material, cleanliness, motion, and inspection requirements mapped to the intended medical use case.
Acceptance: Buyer confirms the sample evidence fits the device development stage.
Step 2
Traceable sample with inspection, backlash/preload, material, and surface finish records.
Acceptance: Sample meets smoothness, fit, backlash, and heat targets in device bench tests.
Step 3
Controlled lot with packaging, traceability, inspection frequency, and change-control expectations.
Acceptance: Quality and engineering teams accept the records for formal validation or supplier onboarding.
We support buyer-led supplier qualification reviews and can align material, inspection, cleanliness, packaging, and change-control records to the agreed project scope.
Yes. We can supply engineering samples with traceable material and inspection data, then align additional cleanliness, packaging, and process records before validation lots.
Inquiry Email
Please include screw type, diameter, lead, stroke, load, drawings, STEP files, and quantity timeline.
NDA signing supported prior to drawing uploads.
Instant Chat
WhatsApp Engineering SupportQuick clarification for drawings, sample photos, and lead-time checks. Complete RFQs are usually triaged within one business day.
08:00 - 18:00 HKT business hours
Drawing and application clarification
